A professional-grade, waterless concrete oil stain cleaner. It utilizes a proprietary recipe of enzymes to eliminate oil stains and other tough spots from unsealed concrete.

Oil Away is capable of removing a variety of stains including oil, cola, coffee, urine, grease, gasoline, kerosene, jet fuel, hydraulic fluid, and diesel fuel. If you have a petroleum-based stain, Oil Away should be your number one go-to choice cleaning product.

Using Oil Away is simple. Sprinkle a small amount of the cleaner onto the stain, then use a soft bristle brush or broom to spread it over the stain. It requires no rinsing or water.

Yes, Oil Away is an eco-friendly product. It’s safe for people, pets, and plants as it doesn’t contain any toxic chemicals.

You can drive on the treated area immediately after applying Oil Away. The product continues to work on the stain over time.

Yes, Oil Away can be applied to fresh oil stains. However, it is recommended that a rag is used to soak up excess liquid prior to applying Oil Away, for maximum results. We suggest using the Oil Away Kit for such a purpose.

Oil Away works better the longer it sits on a stain. While you will see immediate results within seconds of working it into the stain, letting it sit longer can help remove tough stains. The longer it has to penetrate the surface, the better it will work.

In some cases, particularly stubborn or old stains might require multiple applications. Apply Oil Away liberally as directed on the label, and if the stain isn’t completely gone, repeat the process.

Oil Away has been used in the service industry for over twenty years. We’re now making the same professional grade, environmentally friendly cleaner available to the consumer market.

Aside from a soft bristle brush or broom, Oil Away is a standalone, waterless cleaner. Given that it is a waterless, enzymatic cleaner, no rinsing is required, making it a simple, effective, and environmentally sound cleaning solution.

Yes, Oil Away is safe for use around people, pets, and plants. Oil Away is an environmentally friendly cleaner that contains no toxic chemicals.

Oil Away is specifically engineered for unsealed concrete. This allows the enzymes to work below the surface level of the stain and clean down into the pores of the concrete. It is not recommended to use Oil Away on sealed concrete surfaces.

Oil Away is specifically designed to be used on unsealed concrete. We do not recommend the use of Oil Away on any other surface.

No, Oil Away is not designed for use on tinted or colored concrete.

Yes, Oil Away uses a non-toxic, low to no odor, proprietary enzyme-based formula for use on unsealed concrete surfaces both indoors and outdoors. If using indoors, you should ensure that the area is well-ventilated during use.

You can see immediate results within moments of applying Oil Away to unsealed concrete surfaces, but the product continues to work over time. For maximum results, allow the product to sit on the stain for as long as possible.

The amount of Oil Away required can vary based on the severity of the stain, but a light sprinkling is usually sufficient. It’s best to start with a small amount and add more if necessary. One 8-ounce jar is usually enough to cover 60sf or the equivalent of a two-car residential garage.

Oil Away uses a shelf stable recipe. It is recommended to store it in a cool, dry place, out of reach of children with the lid securely fastened.

Oil Away is designed to be used without water on a dry, unsealed concrete surface. It is not recommended to be used with a pressure washer.

No. Oil Away is an environmentally sound product. It’s designed to be safe for the environment, people, pets, and plants, making it a responsible choice for outdoor cleaning tasks.

Oil Away application is as follows:
Sprinkle Oil Away over the oil-stained unsealed concrete surface. Next, brush with a soft bristle brush or broom. Spread the cleaner evenly over the oil-stained surface, going long ways and then width-ways in a crossover pattern to achieve a smooth even layer, completely covering the surface.

Either spread Oil Away out across a greater area or sweep it up and dispose of it.

In some instances, multiple layers of Oil Away may be necessary to remove stubborn stains. If this is the case, subsequent applications can be applied immediately after the first application.

If there is heavy grease or oil buildup, remove the excess with a scraper or wire brush, prior to applying Oil Away.

At this time, it is only recommended to use Oil Away on unsealed gray pavers. We suggest testing in an inconspicuous location on the paver and following the directions on the label.

Oil Away’s proprietary formulation allows it to effectively remove oil stains on concrete without the need for water.

Oil Away is a stand-alone product application that only requires sprinkling it on the stain and a soft bristle brush to effortlessly work it into the soiled area. There is no need for water, in addition to no harmful, polluting runoff with oil and other toxic residue.

No. We happily publish our SDS FDA/EPA information on our website. Oil Away uses nature’s own biochemistry enzymes to remove ugly petroleum linked stains from unsealed concrete, as well as other stains such as cola, urine, and coffee, all without using water. The Oil Away secret is in its proven proprietary manufacturing process.

No. Oil Away will make your existing unsealed concrete look cleaner.

Applying Oil Away prior to a rainstorm is perfectly fine. Rain will not harm the cleaned area after it is applied.

No. Cat litter only soaks up the residual oil stain on the surface. It does not remove oil that has seeped into the pores of the concrete surface. Oil Away works below the surface. The specially formulated enzymes break down the oil-based hydrocarbon petroleum stain. Cat litter does not do this.