How to Use Oil Away™
INSTANT RESULTS
No water needed before, during or after using Oil Away™.
-
Concrete must be completely dry.
-
Scrape off any built-up or caked on oil with a wire brush. Brush until you feel very little resistance, which means your down to the concrete.
-
Sprinkle Oil Away™ on the oil stain.
(Just enough to cover the stain.)
Oil Away™ spreads well so you don’t need to start with too much…
A 5 ounce pouch will cover approximately (40sf-45sf+) depending on the porosity of the concrete.
-
Using a soft bristle brush (such as a paint brush) spread Oil Away™ over the stain working it into the stain in one direction. Then the other direction. (Feather the powder so none is left on the concrete) You will see the oil stain begin to start turning white as Oil Away™ attaches itself to the Oil stain and begins to work.
-
Walk away and let Oil Away enzymes go to work cleaning your oil stains. There is no need to rinse off or sweep up. Your concrete will look cleaner and brighter.
-
The longer Oil Away™ is allowed to stay on the oil stain the better Oil Away™ works.
-
A second application might be needed how much oil there is or how long the oil stain has been there.